3-15
Description
Use the patch delete command to delete currently working patches. After this command is issued, the
patches deleted and become IDLE.
After you execute the command, all patches are deleted. To prevent system problems that have been
solved by the patches from happening again, you need to reload the patches and activate them.
Examples
# Delete patches.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] patch delete
patch load
Syntax
patch load filename
View
System view
Parameters
filename: Patch file name to be specified, a string of 1 to 142 characters.
Patch files are named in the format of [product name]_[baseline version number]_[patch version
number].pat. An example is S3600_1510_P001.pat.
To ensure a successful patch loading, make sure that the baseline version of the patch file is consistent
with the current software version of the device, and the extension of the batch file is .pat.
Description
Use the patch load command to load the specified patch file in the flash memory into the system
memory.
Examples
# Load a patch file named S3600_1510_P001.pat, with a version number of P001.
<Sysname> system-view
To Next Page
Loading...
Need help?
General