1-16
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] priority trust
protocol-priority protocol-type
Syntax
protocol-priority protocol-type protocol-type { ip-precedence ip-precedence | dscp dscp-value }
undo protocol-priority protocol-type protocol-type
View
System view
Parameters
protocol-type protocol-type: Specifies the protocol type, which could be Telnet, SNMP, ICMP, or OSPF.
ip-precedence ip-precedence: Specifies an IP precedence in digits for the specified protocol, in the
range 0 to 7. Alternatively, you can specify the IP precedence in words; available keywords are listed in
Table 1-6.
Table 1-6 IP precedence values in words and in digits
IP precedence (in words) IP precedence (in digits)
routine
0
priority
1
immediate
2
flash
3
flash-override
4
critical
5
internet
6
network
7
dscp dscp-value: Specifies an DSCP precedence in digits for the specified protocol, in the range of 0 to
63. Alternatively, you can specify the DSCP precedence in words; available keywords are listed in
Table
1-7.
Table 1-7 DSCP precedence values in words and in digits
DSCP precedence (in words) DSCP precedence (in digits)
af11
10
af12
12
af13
14
af21
18
af22
20
af23
22
af31
26
To Next Page
Loading...
Need help?
General