H3C S3600 Series Command Manual

4-2
display system-guard ip-record
Syntax
display system-guard ip-record
View
Any view
Parameters
None
Description
Use the display system-guard ip-record command to view the information about IP packets received
by the CPU in the current monitoring cycle.
Examples
# View the information about IP packets received by the CPU in the current monitoring cycle.
<Sysname> display system-guard ip-record
'M': Master port of link aggregation
Index Source IP Destination IP Port
--------------------------------------------------
1 000.000.000.000 000.000.000.000 0/0/0
2 000.000.000.000 000.000.000.000 0/0/0
3 000.000.000.000 000.000.000.000 0/0/0
4 000.000.000.000 000.000.000.000 0/0/0
5 000.000.000.000 000.000.000.000 0/0/0
……
Table 4-2 Description on the fields of the display system-guard ip-record command
Field Description
Index Index
Source IP Source IP address
Destination IP Destination IP address
Port Incoming port
display system-guard l3err state
Syntax
display system-guard l3err state
View
Any view

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English