1-11
dns resolve-target
Syntax
dns resolve-target domain-name
undo dns resolve-target
View
HWPing test group view
Parameters
domain-name: Domain name to be resolved, in the range of 1 to 60 characters.
Description
Use the dns resolve-target command to configure a domain name to be resolved.
Use the undo resolve-target command to remove a domain name to be resolved.
By default, no dns resolve-target information is configured.
This command applies to DNS tests only.
Examples
# Configure the domain name to be resolved as www.test.com.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator dns
[Sysname-hwping-administrator-dns] test-type dns
[Sysname-hwping-administrator-dns] dns resolve-target www.test.com
filename
Syntax
filename file-name
undo filename
View
HWPing test group view
Parameters
file-name: Name of the file to be downloaded/uploaded in FTP tests, a string of 1 to 255 characters.
Description
Use the filename command to specify a file to be downloaded/uploaded in FTP tests.
To Next Page
Loading...
Need help?
General