To Next Page

To Previous Page

3-14

Table 3-11 Description on the fields of display transceiver manuinfo interface

Field Description

Manu. Serial Number

Serial number generated during debugging and

testing

Manufacturing Date

Debugging and testing date.. The date takes the

value of the system clock of the computer that

performs debugging and testing.

Vendor Name Vendor name specified, that is, H3C.

patch activate

Syntax

patch activate

View

System view

Parameters

None

Description

Use the patch activate command to place DEACTIVE patches into the ACTIVE state, replacing the

original codes.

The active patches will become inactive after a system reboot. If you want to run these patches again,

you need to use the command to activate and run these patches.

Examples

# Load patch file S3600_1510_P001.pat.

<Sysname> system-view

System View: return to User View with Ctrl+Z.

[Sysname] patch load S3600_1510_P001.pat

# Activate the patch that has been loaded into the device.

[Sysname] patch activate

patch delete