1-5
Field Description
Invalid Type Pkts Rcvd Number of the packet type errors
reset vrrp statistics
Syntax
reset vrrp statistics [ interface vlan-interface vlan-id [ vrid virtual-router-id ] ]
View
User view
Parameters
vlan-interface vlan-id: Specifies a VLAN interface by its ID. vlan-id is the ID of a VLAN interface.
vrid virtual-router-id: Specifies a VRRP group. virtual-router-id is the VRRP group ID, ranging from 1 to
255.
Description
Use the reset vrrp statistics command to clear the VRRP statistics information.
When you execute this command,
z If neither a VLAN interface nor a VRRP group is specified, the statistics information about all the
VRRP groups on the switch is cleared.
z If only a VLAN interface is specified, the statistics information about all the VRRP groups on the
specified VLAN interface is cleared.
z If both a VLAN interface and a VRRP group are specified, the statistics information about the
specified VRRP group on the specified VLAN interface is cleared.
You can view the current VRRP statistics by using the display vrrp statistics command.
Related commands: display vrrp statistics
Examples
# Clear the VRRP statistics information about all the interfaces on the switch.
<Sysname> reset vrrp statistics
vrrp method
Syntax
vrrp method { real-mac | virtual-mac }
undo vrrp method
View
System view
Parameters
real-mac: Maps the real MAC address of the switch to the virtual IP address of the VRRP group.
To Next Page
Loading...
Need help?
General