2-2
View
User view
Parameters
all: Specifies all Web users.
user-id: Web user ID, an eight-digit hexadecimal number.
user-name: User name of the Web user. This argument can contain 1 to 80 characters.
Description
Use the free web-users command to disconnect a specified Web user or all Web users by force.
Examples
# Disconnect all Web users by force.
<Sysname> free web-users all
ip http acl
Syntax
ip http acl acl-number
undo ip http acl
View
System view
Parameters
acl-number: ACL number ranging from 2000 to 2999.
Description
Use the ip http acl command to apply an ACL to filter Web users.
Use the undo ip http acl command to disable the switch from filtering Web users using the ACL.
By default, the switch does not use the ACL to filter Web users.
Examples
# Apply ACL 2000 to filter Web users (assuming that ACL 2000 already exists.)
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ip http acl 2000
snmp-agent community
Syntax
snmp-agent community { read | write } community-name [ acl acl-number | mib-view view-name ]*
undo snmp-agent community community-name
To Next Page
Loading...
Need help?
General