1-9
Each multicast MAC address entry contains multicast address, forward port, VLAN ID, and so on.
Related commands: display mac-address multicast static.
Examples
# Create a multicast MAC address entry, with the multicast MAC address of 0100-5e0a-0805 and a
forwarding port of Ethernet 1/0/1 in VLAN 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] mac-address multicast 0100-5e0a-0805 interface Ethernet 1/0/1 vlan 1
mac-address multicast vlan
Syntax
mac-address multicast mac-address vlan vlan-id
undo mac-address multicast [ [ mac-address ] vlan vlan-id ]
View
Ethernet port view
Parameters
mac-address: Multicast MAC address in the form of H-H-H.
vlan vlan-id: Specifies the VLAN the current port belongs to. The effective range for vlan-id is 1 to 4094.
Description
Use the mac-address multicast vlan command to create a multicast MAC address entry on the
current port.
Use the undo mac-address multicast vlan command to remove the specified multicast MAC address
entry or all multicast MAC address entries on the current port.
Each multicast MAC address entry contains the multicast address, forwarding port, and VLAN ID
information.
Related commands: display mac-address multicast static.
Examples
# Create a multicast MAC address entry on Ethernet 1/0/1 in VLAN 1, with the multicast address of
0100-1000-1000.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet1/0/1
[Sysname-Ethernet1/0/1] mac-address multicast 0100-1000-1000 vlan 1
mtracert
Syntax
mtracert source-address [ group-address | last-hop-router-address group-address ]
To Next Page
Loading...
Need help?
General