H3C S3600 Series Command Manual

3-7
Table 3-6 Description on the fields of the display patch-information command
Field Description
patch version Patch version number
program version Patch baseline version number
patch status
Patch state: IDLE, DEACTIVE, ACTIVE,
RUNNING
display power
Syntax
display power [ unit unit-id [ power-id ] ]
View
Any view
Parameters
unit-id: Unit ID of a switch.
power-id: Power ID.
Description
Use the display power command to display the working state of the power supply of the switch.
Examples
# Display the working state of the power supply.
<Sysname> display power
Unit 1
power 1
State : Normal
Type : AC
The above information indicates that the power supply type is AC, and works normally.
display schedule reboot
Syntax
display schedule reboot
View
Any view
Parameters
None
Description
Use the display schedule reboot command to display information about scheduled reboot.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English