H3C S3600 Series

1-5
View
Ethernet port view
Parameters
text: Port description, a string of 1 to 80 characters.
Description
Use the description command to configure a description for the port.
Use the undo description command to remove the port description.
By default, no description is configured for a port.
You can use the display brief interface command to display the configured description.
Examples
# Set description string home for the Ethernet 1/0/1 port.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] description home
display brief interface
Syntax
display brief interface [ interface-type [ interface-number ] ] [ | { begin | include | exclude }
regular-expression ]
View
Any view
Parameters
interface-type: Port type.
interface-number: Port number.
|: Specifies to use a regular expression to filter the configuration information entries to be displayed.
begin: Each entry must begin with a specified character string.
include: Each entry must include a specified character string.
exclude: Each entry must not include a specified character string.
regular-expression: Regular expression, a string of 1 to 256 characters.
For details about regular expression, refer to the Configuration File Management module in this manual.