2-1
2 Monitor Link Configuration Commands
Monitor Link Configuration Commands
display monitor-link group
Syntax
display monitor-link group { group-id | all }
View
Any view
Parameters
group-id: Monitor link group ID, ranging 1 to 24.
all: Specifies all the monitor link groups.
Description
Use the display monitor-link group command to display monitor link group information.
Examples
# Display the information about monitor link group 1.
<Sysname> display monitor-link group 1
Monitor link group 1 information:
Member Role Status Last-up-time Last-down-time
----------------------------------------------------------------------
SMLK-2 UPLINK UP 16:37:20 2006/4/21 16:37:20 2006/4/20
AGG-1 DOWNLINK UP
Table 2-1 Description on the fields of the display monitor-link group command
Field Description
Member Member of the monitor link group
Role Role of monitor link group member port: UPLINK or DOWNLINK
Status Status of monitor link group member port: UP or DOWN
Last-up-time Last time the port is up
Last-down-time
Last time the port is down
link-aggregation group
Syntax
link-aggregation group group-id { uplink | downlink }
To Next Page
Loading...
Need help?
General