H3C S3600 Series

1-11
Examples
# Map VLAN 2 to MSTI 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp region-configuration
[Sysname-mst-region] instance 1 vlan 2
region-name
Syntax
region-name name
undo region-name
View
MST region view
Parameters
name: MST region name to be set for the switch, a string of 1 to 32 characters.
Description
Use the region-name command to set an MST region name for a switch.
Use the undo region-name command to restore the MST region name to the default value.
The default MST region name of a switch is its MAC address.
MST region name, along with VLAN-to-MSTI mapping table and MSTP revision level, determines the
MST region which a switch belongs to.
Related commands: instance, revision-level, check region-configuration, vlan-mapping modulo,
active region-configuration.
Examples
# Set the MST region name of the switch to hello.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] stp region-configuration
[Sysname-mst-region] region-name hello
reset stp
Syntax
reset stp [ interface interface-list ]
View
User view