1-26
display cluster members
Syntax
display cluster members [ member-number | verbose ]
View
Any view
Parameters
member-number: Member number of a device, ranging from 0 to 255.
verbose: Displays detailed information about all the devices in a cluster.
Description
Use the display cluster members command to display information about one specific or all devices in
a cluster.
This command is only applicable to a management device.
Examples
# Display information about all devices in a cluster.
<aaa_0.Sysname-cluster> display cluster members
SN Device MAC Address Status Name
0 S3600 000f-e20f-3901 Admin aaa_0.Sysname
1 S3600 3900-0000-3334 Up aaa_1.H3C
2 S3600 000f-e20f-3190 Up aaa_2.3600-3
Table 1-8 Description on the fields of the display cluster members command
Field Description
SN Member number of a device in the cluster
Device Device type
MAC Address Device MAC address
Status Device status
Name Device name
# Display detailed information about all devices in a cluster.
<aaa_0.Sysname-cluster> display cluster members verbose
Member number:0
Name:aaa_0.Sysname
Device:S3600
MAC Address:000f-e20f-3901
Member status:Admin
Hops to administrator device:0
IP: 100.100.1.1/24
Version:
H3C Comware Platform Software.
Comware Software, Version 3.10
To Next Page
Loading...
Need help?
General