1-10
View
Any view
Parameters
dynamic: Displays dynamic ARP entries.
static: Displays static ARP entries.
|: Uses a regular expression to specify the ARP entries to be displayed. For detailed information about
regular expressions, refer to Configuration File Management Command in this manual.
begin: Displays the first ARP entry containing the specified string and all subsequent ARP entries.
exclude: Displays the ARP entries that do not contain the specified string.
include: Displays the ARP entries containing the specified string.
regular-expression: A case-sensitive character string.
Description
Use the display arp | command to display the ARP entries related to string in a specified way.
Related commands: arp static, reset arp.
Examples
# Display all the ARP entries that contain the string 77.
<Sysname> display arp | include 77
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Port Name / AL ID Aging Type
192.168.0.77 0000-e8f5-6a4a 1 Ethernet1/0/2 12 D
--- 1 entry found ---
# Display all the ARP entries that do not contain the string 68.
<Sysname> display arp | exclude 68
Type: S-Static D-Dynamic
IP Address MAC Address VLAN ID Port Name / AL ID Aging Type
10.2.72.162 000a-000a-0aaa N/A N/A N/A S
--- 1 entry found ---
Refer to Table 1-1 for the description on the above output information.
display arp count
Syntax
display arp count [ [ dynamic | static ] [ | { begin | exclude | include } regular-expression ] |
ip-address ]
View
Any view
To Next Page
Loading...
Need help?
General