1-3
Description
Use the display ftp-user command to display the information of the FTP users that have logged in to
the switch, including the user name, host IP address, port number, idle timeout time, and authorized
directory.
For how to create an FTP user on an FTP server, refer to the AAA part of this manual.
Examples
# Display the information of the FTP users that have logged in to the switch.
<Sysname> display ftp-user
UserName HostIP Port Idle HomeDir
admin 192.168.0.152 1029 0 flash:
# If the username exceeds ten characters, characters behind the tenth will be displayed in the second
line with a left-aligning mode. Take username username@test for example, the result is:
<Sysname> display ftp-user
UserName HostIP Port Idle HomeDir
administra
tor 192.168.0.152 1031 0 flash:
Table 1-2 display ftp-user command output description
Field Description
HostIP IP address of the FTP client
Port Port used when the FTP client logs in
Idle Idle time of the FTP client
HomeDir
The initial work path configured for the FTP user, namely, the path
where the user locates after he logs in.
ftp disconnect
Syntax
ftp disconnect user-name
View
System view
Parameters
user-name: Name of the user to be disconnected from the FTP server, a string of 1 to 184 characters.
To Next Page
Loading...
Need help?
General