1-1
1 File System Management Configuration
Commands
The S3600 series Ethernet switches support Intelligent Resilient Framework (IRF), and allow you to
access a file on a switch in one of the following ways:
z To access a file on the specified unit, you need to specify the file in universal resource locator (URL)
format and starting with unit[No.]>flash:/, where [No.] represents the unit ID of the switch. For
example, if the unit ID of the switch is 1, the URL of a file named text.txt in the root directory of the
switch is unit1>flash:/text.txt.
z To access a file on the current unit, you need to enter the file URL starting with flash:/. For example,
the URL of file text.txt in the root directory of the Flash on the current unit is flash:/text.txt.
z To access a file in the current directory, enter the path name or file name directly. For example, to
access file text.txt in the current directory, you can directly input the file name text.txt as the file
URL.
File System Configuration Commands
Note to limit the lengths of device name, directory name, file path and file name within the following
ranges regulated for the switch.
z A directory name should be no more than 91 characters.
z A file name plus its local path name should be no more than 127 characters.
z A device name should be no more than 14 characters.
z A file name plus its complete path name should be no more than 142 characters.
cd
Syntax
cd directory
View
User view
To Next Page
Loading...
Need help?
General