1-11
socket state = SS_PRIV SS_ASYNC
SOCK_DGRAM:
SOCK_RAW:
Table 1-9 Description on the fields of the display ipv6 socket command
Field Description
SOCK_STREAM
Socket type, which can be:
z SOCK_STREAM: Refers to TCP.
z SOCK_DGRAM: Refers to UDP.
z SOCK_RAW: Refers to raw IP.
Task Task name and ID of the created socket
socketid ID assigned by the kernel to the created socket
Proto Protocol ID
LA Local address and local port number
FA Remote address and remote port number
sndbuf Size of the sending buffer
rcvbuf Size of the receiving buffer
sb_cc Number of bytes sent by the sending buffer
rb_cc Number of bytes received by the receiving buffer
socket option Socket option set by the application
socket state State of the socket
SOCK_DGRAM UDP socket
SOCK_RAW Raw IP socket
display ipv6 statistics
Syntax
display ipv6 statistics
View
Any view
Parameters
None
Description
Use the display ipv6 statistics command to display statistics of IPv6 packets and ICMPv6 packets.
You can use the reset ipv6 statistics command to clear all IPv6 and ICMPv6 packet statistics.
Examples
# View the statistics of IPv6 packets and IPv6 ICMP packets.
<Sysname> display ipv6 statistics
To Next Page
Loading...
Need help?
General