H3C S3600 Series

1-6
Examples
# Configure Ethernet 1/0/3 as the master port of smart link group 1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/3
[Sysname-Ethernet1/0/3] port smart-link group 1 master
reset smart-link packets counter
Syntax
reset smart-link packets counter
View
User view
Parameters
None
Description
Use the reset smart-link packets counter command to clear the flush message statistics of Smart
Link.
Examples
# Clear the flush message statistics of Smart Link.
<Sysname> reset smart-link packets counter
smart-link flush enable
Syntax
z In Ethernet port view:
smart-link flush enable control-vlan vlan-id
undo smart-link flush enable
z In system view:
smart-link flush enable control-vlan vlan-id port interface-type interface-number [ to interface-type
interface-number ]
undo smart-link flush enable port interface-type interface-number [ to interface-type
interface-number ]
View
Ethernet port view, system view
Parameters
vlan-id: Control VLAN ID, in the range of 1 to 4,094.