4-16
[Sysname-acl-basic-2001] rule permit source 225.1.1.0 0.0.0.255
[Sysname-acl-basic-2001] quit
[Sysname] msdp
[Sysname-msdp] peer 175.58.6.5 sa-request-policy acl 2001
reset msdp peer
Syntax
reset msdp peer peer-address
View
User view
Parameters
peer-address: Specifies an MSDP peer by its IP address.
Description
Use the reset msdp peer command to reset the TCP connection with the specified MSDP peer and
clear all statistics information about that MSDP peer.
Related commands: reset msdp statistics.
Examples
# Reset the TCP connection with the MSDP peer 125.10.7.6 and clear the statistics about the MSDP
peer.
<Sysname> reset msdp peer 125.10.7.6
reset msdp sa-cache
Syntax
reset msdp sa-cache [ group-address ]
View
User view
Parameters
group-address: Multicast group address; the cached (S, G) entries matching this address are to be
deleted from the SA cache. If no multicast group address is specified, all cached SA entries will be
cleared.
Description
Use the reset msdp sa-cache command to clear (S, G) entries from the SA cache.
Related commands: cache-sa-enable, display msdp sa-cache.
Examples
# Clear the (S, G) entries for multicast group 225.5.4.3 from the SA cache.
<Sysname> reset msdp sa-cache 225.5.4.3
To Next Page
Loading...
Need help?
General