1-5
Field Description
Power Average Value Average power value of the PSE
Power Software Version Version of the PSE software
Power Hardware Version Version of the PSE hardware
PSE CPLD Version
Version of the PSE complex programmable
logical device (CPLD)
PSE Power-Management mode
PoE management mode on the port when the
PSE is overloaded:
z The auto keyword indicates that the auto
mode is adopted, that is, the PoE
management mode based on the PoE priority
of the port is adopted
z The manual keyword indicates that the
manual mode is adopted in the PoE
management on the port
display poe temperature-protection
Syntax
display poe temperature-protection
View
Any view
Parameters
None
Description
Use the display poe temperature-protection command to display the enable/disable status of the
PoE over-temperature protection function on the switch.
Related commands: poe temperature-protection enable.
Examples
# Display the enable/disable status of the PoE over-temperature protection function on the switch.
<Sysname> display poe temperature-protection
The temperature protection is enabled.
poe enable
Syntax
poe enable
undo poe enable
View
Ethernet port view
To Next Page
Loading...
Need help?
General