3-8
Field Description
Flag
Flag of (S, G) or (*, G) entry in the PIM routing table:
z SPT: The (S, G) entry is on the SPT.
z RPT: The (S, G) or (*, G) entry is on the RPT.
z WC: Indicates the (*, G) entry.
z LOC: The switch is connected with the multicast source
directly.
Uptime Time when the entry exists
Timeout in 197 sec The table entry will expire in 197 seconds.
Upstream interface Incoming interface
Upstream neighbor Upstream neighbor
RPT neighbor
z For the (*, G) entry, when this switch is an RP, RPF neighbor
field of the (*, G) entry is Null.
z For the (S, G) entry, when this switch is directly connected
with the source, is an RP, RPF neighbor field of the (S, G)
entry is Null.
Downstream interface list List of downstream interfaces
display pim rp-info
Syntax
display pim rp-info [ group-address ]
View
Any view
Parameters
group-address: Multicast group address. With this argument provided, the command displays the RP
information about the specified multicast group; otherwise, the command displays the RP information
about all multicast groups.
Description
Use the display pim rp-info command to display the RP information of the multicast group.
The output of this command also includes BSR and static RP information.
Examples
# Display the RP information about all multicast groups.
<Sysname> display pim rp-info
PIM-SM RP-SET information:
BSR is: 4.4.4.6
Group/MaskLen: 224.0.0.0/4
RP 4.4.4.6
Version: 2
Priority: 0
Uptime: 00:39:50
To Next Page
Loading...
Need help?
General