H3C S3600 Series Command Manual

1-4
Field Description
Total maximum 802.1x user resource
number
The maximum number of 802.1x users that a switch can
accommodate
Total current used 802.1x resource
number
The number of online supplicant systems
Ethernet1/0/1 is link-down Ethernet 1/0/1 port is down.
802.1X protocol is disabled 802.1x is disabled on the port
Proxy trap checker is disabled
Whether or not to send Trap packets when detecting a
supplicant system in logging in through a proxy.
z Disable means the switch does not send Trap
packets when it detects that a supplicant system logs
in through a proxy.
z Enable means the switch sends Trap packets when it
detects that a supplicant system logs in through a
proxy.
Proxy logoff checker is disabled
Whether or not to disconnect a supplicant system when
detecting it in logging in through a proxy.
z Disable means the switch does not disconnect a
supplicant system when it detects that the latter logs
in through a proxy.
z Enable means the switch disconnects a supplicant
system when it detects that the latter logs in through
a proxy.
Version-Check is disabled
Whether or not the client version checking function is
enabled:
z Disable means the switch does not checks client
version.
z Enable means the switch checks client version.
The port is an authenticator The port acts as an authenticator system.
Authentication Mode is Auto The port access control mode is Auto.
Port Control Type is Mac-based
The access control method of the port is MAC-based.
That is, supplicant systems are authenticated based on
their MAC addresses.
ReAuthenticate is disabled 802.1x re-authentication is disabled on the port.
Max number of on-line users
The maximum number of online users that the port can
accommodate
… Information omitted here
dot1x
Syntax
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
View
System view, Ethernet port view

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English