1-6
Examples
# Set the user with IP address 192.168.0.108 and MAC address 0010-0020-0030 as an
authentication-free user.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] web-authentication free-user ip 192.168.0.108 mac 0010-0020-0030
web-authentication max-connection
Syntax
web-authentication max-connection number
undo web-authentication max-connection
View
Port view
Parameters
number: Maximum number of online Web-authentication users on the port, in the range of 1 to 128.
Description
Use the web-authentication max-connection command to limit the number of online Web
authentication users on the current port. When this threshold is reached, no more users can pass the
Web authentication on the port.
This configuration can only be performed on ports in shared access method.
By default, a port allows up to 128 online Web-authentication users.
Examples
# Configure Ethernet 1/0/1 to allow at most 100 online Web-authentication users.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet1/0/1] web-authentication select method shared
[Sysname-Ethernet1/0/1] web-authentication max-connection 100
web-authentication select method
Syntax
web-authentication select method { shared | designated }
undo web-authentication select
View
Port view
Parameters
shared: Sets the Web authentication access method on the port to shared.
To Next Page
Loading...
Need help?
General