1-3
Destination: 2001:: PrefixLength : 64
NextHop : 2008::3610 Flag : GSU
TimeStamp : Date- 5/7/2006, Time- 14:35:32
Interface : Vlan-interface1
Table 1-2 Description on the fields of the display ipv6 fib command
Field Description
Total number of Routes Total number of routes in the FIB
Destination Destination address to which a packet is forwarded
PrefixLength Prefix length of the destination address
NextHop
Next hop address when a packet is forwarded to the
destination
Flag
Route flag:
“U” — Usable route
“G” — Gateway route
“H” — Host route
“B” — Blackhole route
“D” — Dynamic route
“S” — Static route
TimeStamp Generation time of an FIB entry
Interface Interface from which a packet is forwarded
display ipv6 host
Syntax
display ipv6 host
View
Any view
Parameters
None
Description
Use the display ipv6 host command to display the mapping between host name and IPv6 address.
Related commands: ipv6 host.
Examples
# Display the mapping between host name and IPv6 address.
<Sysname> display ipv6 host
Host Age Flags IPv6Address (es)
SWB 0 static 2002::1
To Next Page
Loading...
Need help?
General