H3C S3600 Series

1-5
z The to-be-set free IP address range cannot include the Web authentication server’s IP address.
z At most four free IP address range can be set.
Examples
# Set IP address range 10.1.1.0/24 as a free address range.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] web-authentication free-ip 10.1.1.0 24
web-authentication free-user
Syntax
web-authentication free-user ip ip-address mac mac-address
undo web-authentication free-user { ip ip-address mac mac-address | all }
View
System view
Parameters
ip-address: IP address of a user.
mac-address: MAC address of the user, in the format of H-H-H (for example, 000d-88f6-44c1).
all: Deletes all authentication-free user settings.
Description
Use the web-authentication free-user command to set an authentication-free user, so that a user
whose source IP and MAC addresses are both identical with those of the authentication-free user can
access the network without the necessary to pass the Web authentication.
Use the undo web-authentication free-user command to remove the setting or all such settings.
By default, no authentication-free user is set.
z You can set up to eight authentication-free users.
z After a user gets online in shared access method, if you configure an authentication-free user
whose IP address and MAC address are the same as those of the online user, the online user will
be forced to get offline.