1-5
Field Description
Description Description of the VLAN.
Name VLAN name.
Tagged Ports Ports out of which packets are sent tagged.
Untagged Ports Ports out of which packets are sent untagged.
interface Vlan-interface
Syntax
interface Vlan-interface vlan-id
undo interface Vlan-interface vlan-id
View
System view
Parameters
vlan-id: Specifies the ID of a VLAN interface, in the range of 1 to 4094.
Description
Use the interface Vlan-interface command to create the VLAN interface for a VLAN and enter VLAN
interface view.
Use the undo interface Vlan-interface command to delete a VLAN interface.
You can create a VLAN interface only for an existing VLAN and must ensure that the ID of the VLAN
interface is the same as the VLAN ID.
You can use the ip address command in VLAN interface view (refer to the IP Address and Performance
Command part for the command description) to configure an IP address for this VLAN interface to
enable it to route packets for the devices in the corresponding VLAN.
Related commands: display interface Vlan-interface.
Examples
# Create the VLAN interface for VLAN 1 and enter VLAN-interface 1 view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1]
name
Syntax
name text
undo name
To Next Page
Loading...
Need help?
General