4-25
Field Description
Full
It indicates that database synchronization between the routers that have
established neighbor relation has been completed, and their link state
databases have been consistent
Total Total number of neighbors in various states
display ospf request-queue
Syntax
display ospf [ process-id ] request-queue
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
Description
Use the display ospf request-queue command to display the information about the OSPF
request-queue.
Examples
# Display the information about the OSPF request-queue.
<Sysname> display ospf request-queue
The Router's Neighbors is
RouterID: 1.1.1.1 Address: 1.1.1.1
Interface: 1.1.1.3 Area: 0.0.0.0
LSID:1.1.1.3 AdvRouter:1.1.1.3 Sequence:80000017 Age:35
Table 4-13 Description on the fields of the display ospf request-queue command
Field Description
RouterID ID of a neighbor router
Address IP address of the interface on a neighbor router
Interface IP address of the interface on the local router
Area Area number of OSPF
LSID Link state ID in the LSA
AdvRouter Router ID of the router that advertised the LSA
Sequence Sequence number of the LSA, used to discover old and repeated LSAs
Age Age of the LSA
To Next Page
Loading...
Need help?
General