1-8
Examples
# Add MAC address 00aa-bb00-0000 to the OUI list and configure its description as ABC.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] voice vlan mac-address 00aa-bb00-0000 mask ffff-ff00-0000 description ABC
voice vlan mode
Syntax
voice vlan mode auto
undo voice vlan mode auto
View
Ethernet port view
Parameters
None
Description
Use the voice vlan mode auto command to configure the voice VLAN assignment mode of the
Ethernet port to automatic.
Use the undo voice vlan mode auto command to configure the voice VLAN assignment mode of the
Ethernet port to manual.
You cannot and need not to assign a port working in automatic voice VLAN assignment mode to the
voice VLAN manually. When the port receives a packet whose source MAC address matches the OUI
list, the port is assigned to the voice VLAN automatically, and the packet is tagged with the voice VLAN
tag. If the port has not received any voice data before the voice VLAN aging timer expires, the port is
removed from the voice VLAN automatically.
By default, an Ethernet port works in automatic voice VLAN assignment mode.
A port working in manual voice VLAN assignment mode needs to be assigned to the voice VLAN
manually. The port stays in the voice VLAN no matter whether voice data is present on the port, that is,
the voice VLAN aging timer does not take effect on the port.
Related commands: display voice vlan status.
Examples
# Configure the voice VLAN assignment mode on Ethernet1/0/2 to manual.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/2
[Sysname-Ethernet1/0/2] undo voice vlan mode auto
voice vlan security enable
Syntax
voice vlan security enable
To Next Page
Loading...
Need help?
General