1-1
1 Mirroring Commands
Mirroring Commands
display mirror
Syntax
display mirror
View
Any view
Parameters
None
Description
Use the display mirror command to display the port mirroring configurations.
Related commands: mirroring-port, monitor-port.
This command is available only on the S3600-SI series Ethernet switches.
Examples
# Display the port mirroring settings on your S3600-SI series Ethernet switch.
<Sysname> display mirror
Monitor-port:
Ethernet1/0/1
Mirroring-port:
Ethernet1/0/2 both
Table 1-1 Description on the fields of the display mirror command
Field Description
Monitor-port Destination port in port mirroring
Mirroring-port Source port in port mirroring
To Next Page
Loading...
Need help?
General