1-4
Description
Use the ftp disconnect command to terminate the connection between a specified user and the FTP
server.
With an H3C S3600 series Ethernet switch acting as the FTP server, if you attempt to disconnect a user
that is uploading/downloading data to/from the FTP server, the S3600 Ethernet switch will disconnect
the user after the data transmission is completed.
Related commands: display ftp-user.
Examples
# Display the current online FTP users.
<Sysname> display ftp-user
UserName HostIP Port Idle HomeDir
admin 192.168.0.152 1029 0 flash:
# Disconnect the user named admin from the FTP server.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ftp disconnect admin
% The user connection will be disconnected after the data transfer finished
[Sysname]
%Apr 2 01:06:14:915 2000 Sysname FTPS/5/USEROUT:- 1 -User admin(192.168.0.152) logged out
ftp server enable
Syntax
ftp server enable
undo ftp server
View
System view
Parameters
None
Description
Use the ftp server enable command to enable the FTP server function of the switch.
Use the undo ftp server command to disable the FTP server function of the switch.
By default, the FTP server function is disabled on the H3C S3600 series switch to avoid potential
security risks.
To Next Page
Loading...
Need help?
General