1-63
Examples
# Set the IP address and UDP port number of the primary authorization server for HWTACACS scheme
hwt1 to 10.163.155.13 and 49 respectively.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authorization 10.163.155.13 49
reset hwtacacs statistics
Syntax
reset hwtacacs statistics { accounting | authentication | authorization | all }
View
User view
Parameters
accounting: Clears HWTACACS accounting statistics.
authentication: Clears HWTACACS authentication statistics.
authorization: Clears HWTACACS authorization statistics.
all: Clears all HWTACACS statistics.
Description
Use the reset hwtacacs statistics command to clear HWTACACS statistics.
Related commands: display hwtacacs.
Examples
# Clear all HWTACACS protocol statistics.
<Sysname> reset hwtacacs statistics all
reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
User view
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Deletes the buffered stop-accounting requests of a
specified HWTACACS scheme. Here, hwtacacs-scheme-name is the name of a HWTACACS scheme,
which is a string of up to 32 characters.
Description
Use the reset stop-accounting-buffer command to clear stop-accounting requests that are buffered
on the switch due to getting no response.
To Next Page
Loading...
Need help?
General