1-3
Table 1-1 Description on the fields of the display voice vlan status command
Field Description
Voice Vlan status
The status of global voice VLAN function: enabled or
disabled.
Voice Vlan ID The VLAN which is currently enabled with voice VLAN.
Voice Vlan security mode
The status of voice VLAN security mode: enabled or
disabled.
Voice Vlan aging time The voice VLAN aging time
Current voice vlan enable port mode The ports on which the voice VLAN function is enabled.
The Current voice vlan enable port mode field lists the ports with the voice VLAN function enabled.
Note that not all of them are transmitting packets in the voice VLAN. To view the ports operating in the
voice VLAN currently, use the display vlan command.
display vlan
Syntax
display vlan vlan-id
View
Any view
Parameters
vlan-id: Specifies the ID of the current voice VLAN in the range of 1 to 4094.
Description
Use the display vlan command to display information about the specified VLAN.
For the voice VLAN, this command displays all the ports in the VLAN.
Related commands: voice vlan, voice vlan enable.
Examples
# Display all the ports in the current voice VLAN, assuming that the current voice VLAN is VLAN 6.
<Sysname> display vlan 6
VLAN ID: 6
VLAN Type: static
Route Interface: not configured
Description: VLAN 0006
Name: VLAN 0006
Tagged Ports:
Ethernet1/0/5
To Next Page
Loading...
Need help?
General