1-17
1 snap etype 0x0abcd
Table 1-4 Description on the fields of the display protocol-vlan vlan command
Field Description
VLAN ID Protocol VLAN ID
VLAN Type
VLAN type. Here, it refers to Protocol-based
VLAN
Protocol-Index Protocol template index
Protocol-Type
Protocol type specified in the protocol template.
Refer to the protocol-vlan command for
detailed description.
port hybrid protocol-vlan vlan
Syntax
port hybrid protocol-vlan vlan vlan-id { protocol-index [ to protocol-index-end ] | all }
undo port hybrid protocol-vlan vlan vlan-id { protocol-index [ to protocol-index-end ] | all }
View
Ethernet port view
Parameters
vlan-id: Specifies the ID of the protocol VLAN bound with the port. The value range is 1 to 4094. At least
one protocol template must have been configured for the VLAN.
protocol-index: Specifies a protocol template, in the range of 0 to 4.
to protocol-index-end: In conjunction with protocol-index, specify a protocol index range. The
protocol-index-end argument takes a value in the range of 0 to 4 and must be greater than
protocol-index.
all: Specifies all protocol indexes. With the all keyword, the port hybrid protocol-vlan vlan command
binds the port with all the protocol templates of the specified protocol VLAN, and the undo form of the
command removes the associations between the port and all the protocol templates of the specified
protocol VLAN.
Description
Use the port hybrid protocol-vlan vlan command to bind the port with the specified protocol
template(s) of a protocol VLAN.
Use the undo port hybrid protocol-vlan vlan command to remove the binding between the port and
the specified protocol template(s) of a protocol VLAN.
To Next Page
Loading...
Need help?
General