H3C S3600 Series Command Manual

3-6
The times of reconnect: 0
The current state: Normal
Table 3-5 Description on the fields of the display memory limit command.
Field Description
system memory safety
Safety threshold of the system memory, in Mbytes.
When the available memory is above the
threshold, the system resumes the connection of
the routing protocol.
system memory limit
Limit threshold of the system memory, in Mbytes.
When the available memory drops below the
threshold, the system cuts the connection of the
routing protocol.
auto-establish enabled
Automatically establish routing protocol
connections when the system memory is above the
safety threshold
Free Memory Free memory of the system, in bytes
The state information about connection
Information about the current routing protocol
connection
The times of disconnect
Number of times that the system automatically
disconnects the routing protocol connection
The times of reconnect
Number of times that the system automatically
re-establishes the routing protocol connection
The current state The current routing protocol connection status
display patch-information
Syntax
display patch-information
View
Any view
Parameters
None
Description
Use the display patch-information command to display the state information about the patches
loaded in the system, including patch version number, patch baseline version number, and patch state.
Examples
# Display the state information about the patches loaded in the system.
<Sysname> display patch-information
----------Patch information----------
patch version P001
program version 1510
patch status DEACTIVE

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English