1-37
Description
Use the reset dhcp server ip-in-use command to clear the specified or all dynamic address binding
information.
Related commands: display dhcp server ip-in-use.
Examples
# Clear the dynamic address binding information about the IP address 10.110.1.1.
<Sysname> reset dhcp server ip-in-use ip 10.110.1.1
reset dhcp server statistics
Syntax
reset dhcp server statistics
View
User view
Parameters
None
Description
Use the reset dhcp server statistics command to clear the statistics on a DHCP server, such as the
number of DHCP unrecognized packets/request packets/response packets.
Related commands: display dhcp server statistics.
Examples
# Clear the statistics on a DHCP server.
<Sysname> reset dhcp server statistics
static-bind client-identifier
Syntax
static-bind client-identifier client-identifier
undo static-bind client-identifier
View
DHCP address pool view
Parameters
client-identifier: The client ID of a static binding, a string with 4 to 160 characters in the format H-H-H…,
each H indicates 4 hex digits except the last H that indicates 2 or 4 hex digits. For example,
aabb-cccc-dd is a valid ID, while aabb-c-dddd and aabb-cc-dddd are both invalid.
Description
Use the static-bind client-identifier command to configure a client ID to be statically bound in a DHCP
global address pool.
To Next Page
Loading...
Need help?
General