H3C S3600 Series Command Manual

3-12
Field Description
TX power(dBM)
Digital diagnosis parameter-TX power, in dBM,
with the precision to 0.01 dBM.
display transceiver interface
Syntax
display transceiver interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Interface type and interface number.
Description
Use the display transceiver interface command to display main parameters of a single or all
transceivers.
Examples
# Display main parameters of the pluggable transceiver on interface GigabitEthernet 1/1/3.
<Sysname> display transceiver interface gigabitethernet 1/1/3
GigabitEthernet1/1/3 transceiver information:
Transceiver Type : 1000_BASE_LX_SFP
Connector Type : LC
Wavelength(nm) : 1310
Transfer Distance(km) : 10(9um)
Digital Diagnostic Monitoring : YES
Vendor Name : H3C
Ordering Name : SFP-GE-LX10-SM1310
Table 3-10 Description on the fields of the display transceiver interface command
Field Description
transceiver information Transceiver information of the interface
Transceiver Type Transceiver type
Connector Type
Type of the connectors of the transceiver:
z Optical connectors, including SC (SC
connector, developed by NTT) and LC (LC
connector, 1.25 mm/RJ45 optical connector
developed by Lucent).
z Other connectors, including RJ-45 and CX4.
Wavelength(nm)
z Optical transceiver: central wavelength of the
laser sent, in nm. If the transceiver supports
multiple wavelengths, every two wavelength
values are separated by a comma.
z Electrical transceiver: displayed as N/A.

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English