5-1
5 DHCP/BOOTP Client Configuration
DHCP Client Configuration Commands
display dhcp client
Syntax
display dhcp client [ verbose ]
View
Any view
Parameters
verbose: Displays the detailed address allocation information.
Description
Use the display dhcp client command to display the information about the address allocation of DHCP
clients.
Note that S3600 series Ethernet switches that operate as DHCP clients support a maximum lease
duration of 24 days currently.
Examples
# Display the information about the address allocation of DHCP clients.
<Sysname> display dhcp client verbose
DHCP client statistic information:
Vlan-interface1:
Current machine state: BOUND
Allocated IP: 192.168.0.2 255.255.255.0
Allocated lease: 86400 seconds, T1: 43200 seconds, T2: 75600 seconds
Lease from 2002.09.20 01:05:03 to 2002.09.21 01:05:03
Server IP: 192.168.0.1
Transaction ID = 0x3d8a7431
Default router: 192.168.0.1
Next timeout will happen after 0 days 11 hours 56 minutes 1 seconds.
Table 5-1 Description on the fields of the display dhcp client command
Field Description
Vlan-interface1
VLAN interface operating as a DHCP client to
obtain an IP address dynamically
Current machine state The state of the client state machine
Allocated IP IP address allocated to the DHCP client
To Next Page
Loading...
Need help?
General