1-25
By default, the hop limit of ICMPv6 reply packets is 64.
Examples
# Set the hop limit of ICMPv6 reply packets to 100.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ipv6 nd hop-limit 100
ipv6 nd ns retrans-timer
Syntax
ipv6 nd ns retrans-timer value
undo ipv6 nd ns retrans-timer
View
VLAN interface view
Parameters
value: Interval for retransmitting an NS message in milliseconds, in the range of 1,000 to 3,600,000.
Description
Use the ipv6 nd ns retrans-timer command to set the interval for retransmitting an NS message.
Use the undo ipv6 nd ns retrans-timer command to restore the interval for retransmitting an NS
message to the default.
By default, the local interface sends NS messages at intervals of 1,000 milliseconds
Related commands: display ipv6 interface.
Examples
# Specify the VLAN-interface 1 to send an NS message at intervals of 10,000 milliseconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] ipv6 nd ns retrans-timer 10000
ipv6 nd nud reachable-time
Syntax
ipv6 nd nud reachable-time value
undo ipv6 nd nud reachable-time
View
VLAN interface view
Parameters
value: Neighbor reachable time in milliseconds, in the range of 1 to 3,600,000.
To Next Page
Loading...
Need help?
General