4-2
Examples
# Summarize subnets 36.42.10.0/24 and 36.42.110.0/24, in OSPF area 1 with summary route
36.42.0.0/16 and advertise it to other areas.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ospf 1
[Sysname-ospf-1] area 1
[Sysname-ospf-1-area-0.0.0.1] network 36.42.10.0 0.0.0.255
[Sysname-ospf-1-area-0.0.0.1] network 36.42.110.0 0.0.0.255
[Sysname-ospf-1-area-0.0.0.1] abr-summary 36.42.0.0 255.255.0.0
area
Syntax
area area-id
undo area area-id
View
OSPF view
Parameters
area-id: ID of an OSPF area, which can be a decimal integer (ranging from 0 to 4294967295) or in the
form of an IP address.
Description
Use the area command to enter OSPF area view.
Use the undo area command to cancel the specified area.
Examples
# Enter OSPF area 0 view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] ospf 1
[Sysname-ospf-1] area 0
[Sysname-ospf-1-area-0.0.0.0]
asbr-summary
Syntax
asbr-summary ip-address mask [ not-advertise | tag value ]
undo asbr-summary ip-address mask
View
OSPF view
To Next Page
Loading...
Need help?
General