1-17
Parameters
date: Specifies to adopt the current system date and time, in the format of Mmm dd hh:mm:ss:ms yyyy.
no-year-date: Specifies to adopt the current system date and time excluding the year, in the format of
Mmm dd hh:mm:ss:ms.
none: Specifies not to include time stamp in the output information.
Description
Use the info-center timestamp loghost command to set the format of time stamp for the output
information sent to the log host.
Use the undo info-center timestamp loghost command to restore the default setting of time stamp
format.
By default, the date time stamp is adopted.
Examples
# Set the no-year-date time stamp for the output information sent to the log host.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center timestamp loghost no-year-date
info-center timestamp utc
Syntax
info-center timestamp utc
undo info-center timestamp utc
View
System view
Parameters
None
Description
Use the info-center timestamp utc command to configure to add UTC time zone to the time stamp of
the date type output in each direction of the information center.
Use the undo info-center timestamp utc command to restore the default.
By default, the information center does not add UTC time zone to the time stamp of the date type in any
output destination.
Related commands: display info-center, info-center timestamp, info-center timestamp loghost,
clock timezone.
Examples
# Configure to add UTC time zone to the time stamp of the output information of the information center.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] info-center timestamp utc
To Next Page
Loading...
Need help?
General