5-20
[Sysname] vlan 10
[Sysname-vlan10] multicast static-router-port Ethernet1/0/1
multicast static-router-port vlan
Syntax
multicast static-router-port vlan vlan-id
undo multicast static-router-port vlan vlan-id
View
Ethernet port view
Parameters
vlan-id: VLAN ID the port belongs to, in the range of 1 to 4094.
Description
Use the multicast static-router-port vlan command to configure the current port in the specified VLAN
as a static router port.
Use the undo multicast static-router-port vlan command to remove the current port in the specified
VLAN as a static router port.
By default, the static router port function is disabled.
Examples
# Configure Ethernet 1/0/1 in VLAN 10 as a static router port.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] interface Ethernet 1/0/1
[Sysname-Ethernet 1/0/1] multicast static-router-port vlan 10
reset igmp-snooping statistics
Syntax
reset igmp-snooping statistics
View
User view
Parameters
None
Description
Use the reset igmp-snooping statistics command to clear IGMP Snooping statistics.
Related commands: display igmp-snooping statistics.
Examples
# Clear IGMP Snooping statistics.
To Next Page
Loading...
Need help?
General