1-18
# Display the time stamp configuration of the information center.
[Sysname] display info-center
Information Center: enabled
Log host:
192.168.0.10, channel number : 2, channel name : loghost
language : english, host facility local : 7
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size : 1024, current buffer size : 512,
current messages : 153, channel number : 4, channel name : logbuffer
dropped messages : 0, overwritten messages : 0
Trap buffer:
enabled,max buffer size : 1024, current buffer size : 256,
current messages : 1, channel number : 3, channel name : trapbuffer
dropped messages : 0, overwritten messages : 0
Information timestamp setting:
with utc
log - date, trap - date, debug - boot
IRF SWITCH OF Device--Unit>1: LOG = disable; TRAP = disable; DEBUG = enable
# If you configure to add the UTC time zone in the time stamp, the system information is output as
follows:
%Dec 8 10:12:21:708 2006 [GMT+08:00:00] Sysname SHELL/5/LOGIN:- 1 - VTY(1.1.0.2) in unit1
login
info-center trapbuffer
Syntax
info-center trapbuffer [ channel { channel-number | channel-name } | size buffersize ]*
undo info-center trapbuffer [ channel | size ]
View
System view
Parameters
size: Sets the size of the trap buffer.
buffersize: Size of the trap buffer, represented by the number of messages it holds. It ranges from 0 to
1,024 and defaults to 256.
channel: Sets the channel through which information is output to the trap buffer.
channel-number: Channel number, ranging from 0 to 9, corresponding to the 10 channels of the system.
To Next Page
Loading...
Need help?
General