EasyManuals Logo

H3C S3600 Series Command Manual

H3C S3600 Series
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #494 background imageLoading...
Page #494 background image
1-16
Re-authentication is enabled on port Ethernet1/0/1
dot1x supp-proxy-check
Syntax
dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
undo dot1x supp-proxy-check { logoff | trap } [ interface interface-list ]
View
System view, Ethernet port view
Parameters
logoff: Disconnects a user upon detecting it logging in through a proxy or through multiple network
adapters.
trap: Sends Trap packets upon detecting a user logging in through a proxy or through multiple network
adapters.
interface-list: Ethernet port list, in the form of interface-list= { interface-type interface-number [ to
interface-type interface-number ] } &<1-10>, in which interface-type specifies the type of an Ethernet
port and interface-number is the number of the port. The string “&<1-10>” means that up to 10 port lists
can be provided.
Description
Use the dot1x supp-proxy-check command to enable 802.1x proxy checking for specified ports.
Use the undo dot1x supp-proxy-check command to disable 802.1x proxy checking for specified
ports.
By default, 802.1x proxy checking is disabled on all Ethernet ports.
In system view:
z If you do not specify the interface-list argument, the configurations performed by these two
commands are global.
z If you specify the interface-list argument, these two commands apply to the specified Ethernet
ports.
In Ethernet port view, the interface-list argument is not available and the commands apply to only the
current Ethernet port.
The proxy checking function takes effect on a port only when the function is enabled both globally and
on the port.
802.1x proxy checking checks for:
z Users logging in through proxies
z Users logging in through IE proxies
z Whether or not a user logs in through multiple network adapters (that is, when the user attempts to
log in, it contains more than one active network adapters.)
A switch can optionally take the following actions in response to any of the above three cases:
z Only disconnects the user but sends no Trap packets, which can be achieved by using the dot1x
supp-proxy-check logoff command.

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals