EasyManuals Logo

H3C S3600 Series Command Manual

H3C S3600 Series
1277 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #406 background imageLoading...
Page #406 background image
2-2
display igmp interface
Syntax
display igmp interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Specifies an interface by its type and number. With this argument
provided, the command displays the IGMP configuration and running information on the specified
interface; otherwise, the command displays the IGMP information on all interfaces running IGMP.
Description
Use the display igmp interface command to display the IGMP configuration and running information
on the specified interface or all interfaces.
Examples
# Display the IGMP configuration and running information on Vlan-interface 1.
<Sysname> display igmp interface Vlan-interface 1
Vlan-interface1 (10.153.17.99):
IGMP is enabled
Current IGMP version is 2
Value of query interval for IGMP(in seconds): 60
Value of other querier time out for IGMP(in seconds): 120
Value of maximum query response time for IGMP(in seconds): 10
Value of robust count for IGMP: 2
Value of startup query interval for IGMP(in seconds): 15
Value of last member query interval for IGMP(in seconds): 1
Value of query timeout for IGMP version 1(in seconds): 400
Policy to accept IGMP reports: none
Querier for IGMP: 10.153.17.99 (this router)
IGMP group limit is 256
Total 1 IGMP group reported
Table 2-2 display igmp interface command output description
Field Description
Vlan-interface1 (10.153.17.99): Interface name (IP address)
IGMP is enabled
IGMP is currently enabled on the interface.
If IGMP is not enabled, no output information is
displayed.
Current IGMP version is 2
IGMP version 2 (default) is running on the
current interface.
Value of query interval for IGMP(in seconds): 60 The IGMP query interval is 60 seconds (default).
Value of other querier time out for IGMP(in
seconds): 120
The other querier present interval is 120 seconds
(default).

Table of Contents

Other manuals for H3C S3600 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the H3C S3600 Series and is the answer not in the manual?

H3C S3600 Series Specifications

General IconGeneral
BrandH3C
ModelS3600 Series
CategorySwitch
LanguageEnglish

Related product manuals