1-36
# Configure option 100 to be 0x11 and 0x22 for the DHCP global address pools.
[Sysname] dhcp server ip-pool 0
[Sysname-dhcp-pool-0] option 100 hex 11 22
reset dhcp server conflict
Syntax
reset dhcp server conflict { all | ip ip-address }
View
User view
Parameters
ip ip-address: Specifies an IP address, whose conflict statistics will be cleared.
all: Clears all address conflict statistics.
Description
Use the reset dhcp server conflict command to clear address conflict statistics.
Related commands: display dhcp server conflict.
Examples
# Clear all address conflict statistics.
<Sysname> reset dhcp server conflict all
reset dhcp server ip-in-use
Syntax
reset dhcp server ip-in-use { all | interface [ interface-type interface-number ] | ip ip-address | pool
[ pool-name ] }
View
User view
Parameters
all: Clears the dynamic address binding information about all IP addresses.
interface [ interface-type interface-number ]: Clears the dynamic address binding information about a
specified interface address pool. If you do not specify the interface-number argument, this command
clears the dynamic address binding information about all interface address pools.
ip ip-address: Clears the dynamic address binding information about a specified IP address.
pool [ pool-name ]: Clears the dynamic address binding information about a specified address pool.
The pool-name argument, a string of 1 to 35 characters, is the name of an address pool. If you do not
provide this argument, this command clears the dynamic address binding information about all global
address pools.
To Next Page
Loading...
Need help?
General