H3C S3600 Series

1-1
1 VRRP Configuration Commands
z Keywords in some commands are modified. See display vrrp, display vrrp statistics, reset vrrp
statistics
, vrrp vrid authentication-mode, and vrrp vrid track interface.
z Keyword verbose is added to the display vrrp command to display the detailed information of the
VRRP group(s). See
display vrrp.
The S3600-EI series switches support the VRRP feature, but not the S3600-SI series.
VRRP Configuration Commands
display vrrp
Syntax
display vrrp [ verbose ] [ interface vlan-interface vlan-id [ vrid virtual-router-id ] ]
View
Any view
Parameters
verbose: Displays detailed state information of VRRP.
vlan-interface vlan-id: Displays VRRP state information of the specified VLAN interface. vlan-id is the
VLAN interface ID.
vrid virtual-router-id: Displays state information of the specified VRRP group. virtual-router-id is the
VRRP group ID, in the range 1 to 255.
Description
Use the display vrrp command to display the brief VRRP state information. For details, refer to
Table
1-1.
Use display vrrp verbose command to display the detailed VRRP state information. refer to
Table 1-2
for details.
z If you do not specify a VLAN interface or a VRRP group, the command will display the state
information of all VRRP groups on the switch.