4-10
The Count of Route is 0
Table 4-2 Description on the fields of the display ospf asbr-summary command.
Field Description
net Network address of the summary route
mask Subnet mask of the summary route
tag Tag of the summary route
status
Advertisement state of the summary route, including
DoNotAdvertise: The summary can not be advertised.
Advertise: The summary can be advertised.
display ospf brief
Syntax
display ospf [ process-id ] brief
View
Any view
Parameters
process-id: OSPF process ID, in the range of 1 to 65535. If you do not specify a process ID, this
command applies to all current OSPF processes.
Description
Use the display ospf brief command to display brief OSPF information.
Examples
# Display brief OSPF information.
<Sysname> display ospf brief
OSPF Process 1 with Router ID 7.7.7.7
OSPF Protocol Information
RouterID: 7.7.7.7 Border Router: Nssa Area AS
Spf-schedule-interval: 5
Routing preference: Inter/Intra: 10 External: 150
Default ASE parameters: Metric: 1 Tag: 1 Type: 2
SPF computation count: 30
Area Count: 2 Nssa Area Count: 1
Area 0.0.0.0:
Authtype: none Flags: <>
SPF scheduled: <>
Interface: 192.168.0.39 (Vlan-interface1)
Cost: 10 State: DROther Type: Broadcast
To Next Page
Loading...
Need help?
General