H3C S3600 Series Command Manual

1-2
Information request: 0
Information reply: 0
Netmask request: 0
Netmask reply: 0
Unknown type: 0
Table 1-1 Description on the fields of the display ip interface command
Field Description
Vlan-interface1 current state Current physical state of VLAN-interface 1
Line protocol current state Current state of the link layer protocol
Internet Address
IP address of the interface followed by:
z Primary: Identifies a primary IP address, or
z Sub: Identifies a secondary IP address.
Broadcast address
Directed broadcast address of the subnet
attached to the interface
The Maximum Transmit Unit Maximum transmission unit on the interface
IP packets input number: 9678, bytes: 475001,
multicasts: 7
IP packets output number: 8622, bytes: 391084,
multicasts: 0
Total number of packets, bytes, and multicast
packets forwarded and received on the interface
TTL invalid packet number Number of received invalid TTL packets
ICMP packet input number: 0
Echo reply: 0
Unreachable: 0
Source quench: 0
Routing redirect: 0
Echo request: 0
Router advert: 0
Router solicit: 0
Time exceed: 0
IP header bad: 0
Timestamp request: 0
Timestamp reply: 0
Information request: 0
Information reply: 0
Netmask request: 0
Netmask reply: 0
Unknown type: 0
Total number of received ICMP packets,
including:
Echo reply packet, unreachable packet, source
quench packet, routing redirect packet, Echo
request packet, router advert packet, router
solicit packet, time exceed packet, IP header bad
packet, timestamp request packet, timestamp
reply packet, information request packet,
information reply packet, netmask request
packet, netmask reply packet, and unknown
types of packets.
display ip interface brief
Syntax
display ip interface brief [ interface-type [ interface-number ] ]

H3C S3600 Series Specifications

General

Brand	H3C
Model	S3600 Series
Category	Switch
Language	English