H3C S3600 Series

1-8
Use the undo smart-link group command to remove the specified smart link group.
After creating a smart link group, you must configure member ports for this smart link group.
Related commands: port smart-link group, link-aggregation group, port.
Make sure that the smart link group has no members before executing the undo smart-link group
command.
Examples
# Create a smart link group.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] smart-link group 1
New Smart Link Group has been created.
[Sysname-smlk-group1]