1-7
Description
Use the display ntdp device-list command to display the cluster device information collected by
NTDP.
Examples
# Display the list of devices collected by NTDP.
<Sysname> display ntdp device-list
MAC HOP IP PLATFORM
000f-e20f-3901 0 100.100.1.1/24 S3600
000f-e20f-3190 1 16.1.1.1/24 S3600
Table 1-3 Description on the fields of the display ntdp device-list command
Field Description
MAC MAC address of a device collected by NTDP
HOP Hops from this device to the collected device
IP
IP address and mask length of the management VLAN
interface on the collected device
PLATFORM Platform information about the collected device
# Display detailed device information collected by NTDP.
<Sysname> display ntdp device-list verbose
Hostname : H3C
MAC : 000f-e20f-1234
Hop : 0
Platform : S3600
IP : 100.100.1.1/24
Version:
H3C Comware Platform Software.
Comware Software, Version 3.10
Copyright(c) 2004-2007 Hangzhou H3C Tech. Co., Ltd. All rights reserved.
S3600-28P-EI S3600-EI-1545
Cluster : Candidate switch
Peer MAC Peer Port ID Native Port ID Speed Duplex
000f-e20f-3190 Ethernet1/0/22 Ethernet3/0/21 100 FULL
-----------------------------------------------------------------------------
Hostname : 3600-3
MAC : 000f-e20f-3190
Hop : 1
Platform : S3600
IP : 16.1.1.1/24
Version:
To Next Page
Loading...
Need help?
General